PAV-VIM1CP2-xx Quick Reference Guide | 009-2033-01
Copyright 2022 Savant Systems, Inc | 220823
45 Perseverance Way, Hyannis, MA 02601
1 of 2
Box Contents
Networking Guidelines
To ensure that the IP Address will not change due to a power outage,
Savant recommends using DHCP reservation within the router. By
using this method IP Addresses for all devices can be managed from a
single UI, avoiding the need to access devices individually.
NOTE: IP video device requirements and how to manage IP addresses
are available on the Savant Device Netwoking Guidelines on the
Savant Customer Community.
Front Panel
A
Power LED
Off
- Device is off. No power applied.
Blue
- Main board is powered
B
Video LED
Off
- No video signal detected.
Blue
- Video signal detected.
C
LinkTX LED
Off
- No valid connection
Blue
- Valid link
Blinking
- Sending Ethernet Data
D
LinkRX LED
Off
-
No valid connection
Blue
- Valid link
Blinking
- Receiving Ethernet
E
Status
Blue
- Reset button is pressed when the
device is powered on
Blinking
- Reset button has been released or
the device was powered on without holding
the reset button
F
P1
Reserved for future use.
G
Reset
Hold down this button with a pointed
stylus for 20 seconds while powering up
the device to restore the device to factory
default settings
Specifications
Environmental
Temperature
30° to 105° F (0° to 40° C)
Humidity
10% to 90% Relative Humidity (non-condensing)
Dimensions and Weights
Height
Width
Depth
Weight
Device
0.98 in
(2.48cm)
6.3 in
(16cm)
5.72 in
(14.52cm)
1.35 lb
(0.61 kg)
Shipping
3.63 in
(9.22 cm)
15.5 in
(39.37 cm)
8.5 in
(21.59 cm)
2.65 lb
(1.20 kg)
Power
Power over
Ethernet (PoE+)
IEEE 802.3at
Input Power
12V 2A DC
Power
Consumption
16 W
Audio
Supported
Formats
Pass-though of all HDMI 2.0 audio formats are
supported.
Power
Video
LinkTx
LinkRx
Status
P1
Reset
B
C D E
F
G
A
Network Requirements
For more information, see the
Savant Device Networking Guidelines
on the
Savant Customer Community.
(1) Single Video IP Transmitter (PAV-VIM1CP2-xx)
(1) Installation kit (075-0210-xx)
(1) Power Adapter with International Clips (025-0195-xx)
(1) International Clips (CN, US, UK, EU & AUS)
(2) Mounting Brackets (071-1093-xx)
(4) M2.5 x 4mm screws (for mounting brackets) (039-0590-xx)
(1) IR Emitter (4ft long) (064-0442-xx)
(1) 3-pin RS232 Control Connector (028-0805-xx)
(1) Product Information and Regulatory Statement (009-1950-xx)
1 = at 24 Hz
2 = at 25 Hz
3 = at 30 Hz
4 = at 50 Hz
5 = at 60 Hz
Video
HDR
Supported
Supported
Formats
640x480
5
720x480
6
720x576
4
800x600
5
1024x768
5
1280x720
4
1280x720
5
1280x1024
5
1920x1080
1
1920x1080
3
1920x1080
4
1920x1080
5
1920x1200
5
3840x2160
1
3840x2160
2
3840x2160
3
3840x2160
4
3840x2160
5
4096x2160
3
4096x2160
5
Required Components
– Savant IP Video Receiver
– Savant System Host
– Savant qualified 10G Managed Network Switch
– Savant User Interface
– Savant Development Environment (SDE)
Additional Information
Refer to the following documents located on the
Savant Customer
Community
for additional information.
– Savant IP Video Deployment Guide (009-1977-xx)
– Savant IP Video Network Configuration Guide (009-1552-xx)
– Savant IP Audio Deployment Guide (009-1571-xx)
– Savant Device Networking Guidelines
Compliance
Safety and
Emissions
FCC Part 15
CE
C-Tick
RoHS
Compliant
Supported Releases
Software
Release
da Vinci 9.4 and higher
Supported Audio and Video Formats
Savant® IP Video Single Input Transmitter 4K UHD with Control (PAV-VIM1CP2)
Quick Reference Guide
