background image

PAV-AOMBAL8C-xx Quick Reference Guide  |  009-1605-02 

Copyright 2021 Savant Systems, Inc | 210120

45 Perseverance Way, Hyannis, MA 02601 

Savant.com 

 |  508.683.2500

1  of  2

Box Contents

(1)  16 Channel Balanced Audio Output IP Receiver  

 (PAV-AOMBAL8C-xx)

(1)  Installation Kit (075-0204-xx)

 

(8)  Stereo Connectors (028-9347-xx)

 

(2)  3-pin Control Connector (028-9351-xx)

 

(1)  5V 3A Multi-Blade Power Supply (025-0223-xx)

(1)  Product Information and Regulatory Insert (009-1950-xx)

Specifications

Environmental

Temperature

32° to 104° F (0° to 40° C)

Humidity

10% to 80% Relative Humidity  

(non-condensing)

Dimensions and Weight

Height

1.6in (41.5 mm)

Width

8.5in (215.0 mm)

Depth

3.7in (93.3 mm)

Weight

Net: 1.4lb (0.64 kg) Shipping: 2.3lb (1.05 kg)

Power

Power Supply

5V DC 3A Multi-Blade

Maximum Power

15 watts

Power over Ethernet 

(PoE)

(PAV-AOMBAL8C-10 

Only

) IEEE 802.3af

Networking

Supported  

Standard

IEEE 802.1 AVB/TSN switches 

IEEE 802.3 Ethernet

Regulatory

Safety and Emissions

FCC Part 15 

CE 

C-Tick 

 

 

RoHS

Compliant

Front Panel

A B

Power Status

Power LED

Green

: System has power and is operating  

normally.

Off

: System is not receiving power

.

Status LED

Off

: Embedded processor is resetting, or is  

powered up, and is booting the embedded 

firmware. 

Green

: Host has established communications 

with the embedded system.

Green Blinking

: Embedded system is ready, but 

no communication has been established with the 

host.

Red

: Host has determined the firmware needs to 

be updated, but a problem occurred during the 

process that will initiate a reset.

Red Blinking

: Embedded firmware is running, but 

has not received a DHCP IP Address.

Amber

: Host is updating the embedded  

firmware.

Amber Blinking

: Embedded system has a valid 

link-local IP Address and is connecting to the 

host.

A

B

1s

1s

Repeat

1s

1s

Repeat

1s

1s

Repeat

Installation

The PAV-AOMBAL8C should be installed on a solid, flat, level surface. 

The device will fit on a 1U rack shelf. The location should be dry, well  

ventilated, and out of direct sunlight.

IMPORTANT!

 The PAV-AOMBAL8C must to be connected to a AVB 

Switch. Also a Savant AVB audio input device is required. 

Network Requirements

For networking guidelines and recommendations, refer to the 

Savant 

Device Networking Guidelines

 available on the 

Savant Community 

Knowledge Base

.

Supported Releases

PAV-AOMBAL8C-00

da Vinci 8.10.2 and higher

PAV-AOMBAL8C-10

da Vinci 8.10.2, 9.3.4 and higher

Savant® ProAV 16 Channel Balanced Audio Output IP Receiver 

with Control (PAV-AOMBAL8C)

Quick Reference Guide

Отзывы: