Sav 245.09, Руководство по эксплуатации, Страница: 61 / 72

Version 1.0
[
61
]
EN
SAV 245.09 /.10 /.99 6 OPERATION
DANGER!
Risk of crushing!
If the magnet is used vertically, this creates a risk of crushing from falling
workpieces.
■
Secure workpieces against falling during chucking and releasing.
DANGER!
Risk of crushing!
Sine tables present a crushing risk from the swivelling mechanism.
■
Securely hold on to the magnet when releasing the swivel angle without
gauge block supports!
■
Always release the clamping and hold on to the magnet when adjusting
using the sine principle!
DANGER!
Risk of crushing!
Sine tables without adjustment mechanism pose a risk of the top plate falling
down and causing crush injuries to hands.
Sine tables with adjustment mechanism poses a risk of jamming during the
adjustment motion.
■
On smaller devices, always hold on to the top plate securely during
adjustment.
■
On sine tables with adjustment mechanism, note the risk of jamming
during the adjustment motion. Proceed with particular caution during the
adjustment.
Operating conditions
■
Never use a poorly functioning or damaged sine table!
■
Never leave the magnet switched on without a workpiece!
■
The pole plate of the magnet must always be kept clean and level!
■
For heavy roughing work, we recommend absorbing the displacement forces with fixed stops!
■
Never work with reduced holding force!
■
The maximum workpiece temperature must not exceed 80 °C!
■
Always use appropriate shielding during machining, so that any ejected swarf or parts do not pose a risk
for the operator!
■
Never chuck a workpiece with a large projection or height beyond the pole plate (max. height approx.
1 x workpiece width)!
■
If possible, do not chuck any workpieces with irregular contact surfaces!
■
Gauge block supports and axle bearings must always be kept free from dirt and moisture!
■
Never let the magnet drop onto the stop bar supports with the measuring bolts!