sauter Equitherm EQJW 125, Руководство пользователя

Страница: 48 / 74

EQJW 125: Heating controller
Communication functions
7001029003 A
© Fr. Sauter Ltd.
47
Read and write the weekly switching commands by Modbus
The holding registers as from 42000 contain the switching commands for the
heating circuit as per the table below:
Command
1
Command
2
Command
3
Command
4
Command
5
Command
6
Mon 42000 42001 42002 42003 42004 42005
Tue 42006 42007 42008 42009 42010 42011
Wed 42012 42013 42014 42015 42016 42017
Thu 42018 42019 42020 42021 42022 42023
Fri 42024 42025 42026 42027 42028 42029
Sat 42030 42031 42032 42033 42034 42035
Sun 42036 42037 42038 42039 42040 42041
Whole week 42042 42043 42044 42045 42046 42047
Tab. 4: Switching commands
Every possible switching command has its own holding register (16-bit value),
which can be read or written. The register has the following content:
Command Time
Numerical
value
(decimal)
3 0 7 3 0 30730
1 = stand-by mode
2 = reduced mode
3 = normal mode
To change the factory setting for the first switching command (every day, as
from 6:00 hrs, nominal operation) to 7:30 hrs, the value 30730 (instead of
30600) should be written in register 42042.
Examples