sauter Equitherm EQJW 125, Руководство пользователя

Страница: 34 / 74

EQJW 125: Heating controller
Operation
7001029003 A
© Fr. Sauter Ltd.
33
1. After you select the switch position, the current
time is shown. The current operating status
(here: sun for normal mode = daytime
operation) and the current status of the outputs
are shown on the lower margin of the display in
this case (not illustrated here, see Section 2.5).
2. Turn the input knob clockwise to show the
date. The numbers of the month/day and year
alternate continuously in the display.
3. Turn the knob clockwise again to see the room
setpoint temperature (only if a room sensor is
present),
the current actual value for the room
temperature (only if a room sensor is present),
the flow setpoint (not available in OFF mode or
summer mode, for example),
the current actual value for the flow
temperature,
and the outdoor temperature that is currently
measured.
4. Turn the knob further in a clockwise direction to
display the time again.
4.1.2 Display when OFF mode, reduced mode and normal mode are set
Press the ESC button once to go directly to the time display.
You can also turn the knob in the opposite direction to scroll backwards
through the displays. In special cases, more displays can be added to the
display loop, e.g.
the display (see section 7) can be added in case of a fault,
a display of the connection status can be added for modem operation.