sauter EQJW145, Руководство по эксплуатации

Страница: 13 / 110

EQJW145: Heating controller
Description of the operating controls
7010015003 A
13
© Fr. Sauter AG
2.4 Input knob
You can use the input knob to scroll through menus, and
to select or change values. Unless explicitly described
otherwise, you can scroll through or change
menus/values in a ring structure. There is no 'limit stop'
for adjusting values or scrolling.
The input knob has a key function, i.e. you can press it.
This is used to select the parameter just shown for
changing, or to confirm a flashing value, or to access a
lower menu level.
2.5 ESC key
Press the ESC key to cancel operations, or to return from
a lower menu item to the next level up.
2.6 Display
The device has an LC display (see 2.1), which can show various items of
information at the same time. The next illustration shows what the symbols
mean:
0 1 2 3 4 5 6 7 8..........2 1 22 23 24
Times for normal mode on the current day
Time, date, setpoints, actual values, etc.
Automatic mode according to the weekly and calendar switching
programme. flashing: temperature change for limited (unlimited) period
Heating circuit is in normal mode flashing. Optimisation takes place on
changing to normal mode.
Heating circuit is in reduced mode flashing. Optimisation takes place on
changing to reduced or off mode.
Heating circuit is in back-up mode. flashing: anti-frost function is active
At least one sensor is faulty (or not connected)
Heating medium pump is switched on
Final control element 1 is opened ( ) or closed ( )
Final control element 2 is opened ( ) or closed ( )
Display of setpoint temperature. flashing: display of actual temperature
Display of flow temperature