63
10
MEMORY
10.1
Memory Menu
PARAMETER
DESCRIPTION
This page allows you to start the Flue gas analysis.
The displayed data summarises the analysis mode and the selected memory.
Allows the average of the analyses contained in the selected memory to be displayed.
SEE CHAPTER 10.4.
-
Allows you to choose the number of the memory slot in which to store the Flue gas analysis and/or draft
measurement, opacity index, etc. For each memory slot, it is possible to record the clients’ information (name,
address, telephone number, boiler type, etc.).
-
Allows you to display and print the analyses in the memory, either individually or as an average. The analyses can
be found (through the interactive "
Find
" function) by memory slot location or by save date; it is also possible to
display the draught, opacity index and ambient CO.
In the "
Memory Recall
" menu, the Print menu can only be activated on the analysis display page or on the
draught, opacity index and ambient CO data display page.
Data logger
This submenu is used to define how the memory is analysed and selected.
Maintenance certification:
This mode will allow you to perform your mandatory measurements in order to edit your maintenance certification
either via tablet (Android OS) or on PC. You can therefore perform your ambient CO measurement, draught and Flue
gas analysis; the analyser will save all your data, then you can send this information directly via Bluetooth to your
tablet, smartphone or PC. In the case of manual programming, the analysis will be performed manually and
automatic printing and analysis time settings will not be taken into account. It will then be possible to start the
manual analysis until the displayed values stabilise for at least two minutes, at which point you can then decide to
save or print the analysis report directly, which will be written according to the selections previously decided upon. At
the end of the three analyses, it is possible to recall the page of the average analysis containing all the information to
be transcribed on the maintenance certification. In both automatic and manual modes, the information displayed on
CO / NO / NOx pollutants can be translated into normalised values (with reference to the previously recorded O2
concentration).
CAUTION!
As part of measurements performed in maintenance certification mode, analyses referring to a client are
all saved under the same numerical memory reference; therefore, when deleting the memory referring to a client, all
analyses and measurements archived for the same client will be deleted as well.
KEY
FUNCTION
Enables the displayed interactive operations.
Return to the previous page.
CONTEXT KEY
FUNCTION
◄
Select the available parameters.
OK
Enter in the selected parameter
►
Select the available parameters.
Save
Average
Select
15/01/14
10:00
Memory
Save
Average
Select
Data logger
Delete
Usage %
