Planning, transport, installation
LASERTEC 40
Page 34
Transport using roller systems
Carriages on rollers or similar roller transport systems are required to
move the machine to a place that is inaccessible for crane.
It is only allowed to use roller transport systems for transport on an
even floor.
On sloping floors there is a
risk of accident
due to the
machine sliding off or tipping.
In addition to these safety instructions, it is essential you also follow the
safety instructions in the operating instructions for the roller, transport and
lifting systems used.
•
Transport using roller transport systems is only allowed to be
undertaken by authorised specialist personnel. A minimum of 2
people are required for transport. The safe seating of the roller
systems is to be continuously checked.
•
It is to be ensured the safety distance to people not directly involved
in the transport is 1.5 times the height of the item lifted.
•
The systems necessary for the transport are only allowed to be used
at fixed points on the machine, i.e. at the machine base.
The transport timbers must be removed prior to transport using the roller
systems.
•
Secure the machine against slipping prior to and during fitting and
transport using the roller transport systems.
There must not be any lubricating oil or grease between the machine base
and the bearing surface on the roller transport system. The surface
between the machine base and the roller system must be fitted with non-
slip materials!
•
In tight spaces (< 2 m), there must not be any people between the
machine and fixed objects (walls, pillars, etc.).
•
When fitting roller systems, the steering roller is always to be fitted
last and is also to be removed first on the removal of roller systems.
•
Roller transport systems without any steering must be fitted to the
outermost points under the machine base.
