Planning, transport, installation
LASERTEC 40
Page 2
Foreword
Dear
customer,
We are pleased you have decided for an Lasertec machine.
Some of the details on your Lasertec machine may vary from the
illustrations in this manual. However, this situation will have no effect
on the operation of the machine.
If you have any questions on this machine manual, or you want to re-
order the booklet, please state the order no.
A few instructions for your safety
It is imperative this machine manual is followed for the safe operation
of the machine. Ensure the manual is
available
at the machine.
Nobody without the necessary training - whether provided internally, by
a training organisation or directly by SAUER GmbH - is allowed to
operate the machine, even for a short time.
Read the general health and safety regulations published by the
related authorities. If the regulations are not hung on the notice board
in your organisation, ask the responsible safety officer.
Follow the instructions
for correct use
on the following pages.
A brochure is supplied with every machine manual; this brochure
contains important
instructions on health and safety
on Lasertec
machines. Read this brochure before you work on an Lasertec
machine for the first time.
Close the splash protection feature
before you start machining.
Machines that are used in the automatic mode must always be
equipped with a splash protection feature.
Changes
We reserve the right make changes to the design, features and
accessories in the interest of further development.
It is therefore not possible to derive any claims from the information,
illustrations and descriptions.
Errors excepted.
We wish you every success!
SAUER GmbH
