Saturn South SS9007.2 Mini Скачать руководство пользователя страница 3

 

1

 

Safety Notices 

 

This manual does not comprehensively cover all safety measures for installation and operation of 
the device, since local code requirements and special operating conditions may necessitate further 
measures. This manual does however contain important safety information pertaining to the correct 
installation and usage of the device, and should be read carefully before attempting to install and 
use the device. 

 

Qualified Personnel 

This device should be installed by technically qualified personnel. Failure to install in compliance 
with national and local electrical codes and according to Saturn South recommendations may result 
in electrical shock or fire hazard, unsatisfactory performance, or equipment failure. 

This product is not intended for use by persons (including children) with reduced physical, sensory or 
mental capabilities, or lack of experience or knowledge, unless they have been given supervision or 
instruction concerning use of the product by a person responsible for their safety. 

Children should be supervised to ensure that they do not play with the product. 

 

Maintenance 

Do not rely on this product to provide galvanic isolation to a circuit. If maintenance is being 
performed on the connected circuit, disconnect the power by means of a primary protection device 
such as a circuit breaker or mains switch in accordance with local regulations. 

Servicing of this device in the field is not possible and should not be attempted. If servicing is 
required, please return this device to Saturn South or an authorised distributor. Opening the product 
enclosure, for any reason, will render the Product Warranty void. 

Содержание SS9007.2 Mini

















Отзывы: