SATO TH2 Series, Руководство оператора

Страница: 55 / 160

Section 3: Configuration and Operation
TH2 Series Operator Manual Page 3-29
3.6 APPLICATION MENU (Cont’d)
3.6.9 When TextBox is selected in the FIELDTYPE menu
The following flow summarizes the sequence for defining the field type while editing the field of the format.
Menu Description
Displays text box width input range and input field with default value.
Enables input of new text box width value.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Displays number of text box rows input range and input field.
Enables input of new number of rows.
Notes:
• When “0” is set, the textbox will resize to as many rows needed depending
on its data.
• If the value is outside the allowed range, Invalid will be displayed.
FIELDTYPE
menu
Select
6.TextBox
Set textbox
width
Set the number
of textbox rows
Enable input of
new delimiter
Enable input of
new hyphen
Proceed to the
FONTTYPE setting
menu.
Select
alignment point
Set top margin
Set bottom
margin
Set left margin
Set right
margin
Select text
style
Select FIT
as 1.ON
FIT screen is displayed
when ROWS was set as 1 .
Select
1.truetype
Select
2.bitmap
Select FIT
as 2.OFF