SATO TH2 Series, Руководство оператора

Страница: 53 / 160

Section 3: Configuration and Operation
TH2 Series Operator Manual Page 3-27
3.6 APPLICATION MENU (Cont’d)
3.6.8 When Image is selected in the FIELDTYPE menu
The following flow summarizes the sequence for defining the field type while editing the field of the format.
Menu Description
Displays input range and input field with default value.
Enables input of box frame thickness.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Enables the selection of anchor point of the box field.
TOP_LEFT , TOP_CENTER , TOP_RIGHT can be selected.
Anchor Point is a field co-ordinate representing the field regarding positioning
and rotation.
FIELDTYPE
menu
Select the source.
Please refer to the flow
of individual selection.
Select
5.Image
Set horizontal
position
Set the vertical
position
Select loaded
image
If 1.FIX is
selected
Set the horizontal
magnification value
Set the vertical
magnification value
Select anchor
point
Proceed to the FIELD
search screen or new
field NAME input
screen depending on
the previous operation.