SATO TH2 Series, Руководство оператора

Страница: 48 / 160

Section 3: Configuration and Operation
Page 3-22 TH2 Series Operator Manual
3.6 APPLICATION MENU (Cont’d)
3.6.4 When Barcode is selected in the FIELDTYPE menu
The following flow summarizes the sequence for defining the field type while editing the field of the format.
Menu Description
Displays input range and input field.
Enables input of text field vertical magnification.
Note:
If the value is outside the allowed range, Invalid will be displayed.
Enables setting of text field direction in 4 angles; 0 , 90 , 180 or 270 degree.
FIELDTYPE
menu
Select
2.Barcode
Select barcode
Set horizontal
position
Set the vertical
position
Select barcode ratio
Set the barcode narrow width
Set the code cell size
Select anchor
point
Select the source.
Please refer to the flow
of individual selection.
Select barcode
direction
Set barcode
height
Select correction
level
Set the human readable
below barcode info.
Only applicable for:
EAN-8, GS1-128 Composite
CC-A/B, GS1-128 Composite
CC-C, GS1-128, Interleaved 2 of
5, UPC-A, UPC-E, Bookland,
Codabar, Code 128, Code 39,
EAN-13
Only applicable for:
Interleaved 2 of 5, Codabar,
Code 39
Not available for:
Data Matrix, Micro QR Code,
QR Code.
Only applicable for:
Micro QR Code, QR Code
Only applicable for:
GS1-128
Only applicable for:
Micro QR Code, QR
Code, Data Matrix
Select
encoding
Only applicable for:
Micro QR Code,
QR Code
Set the human
readable barcode info.
Only applicable for:
EAN-8, EAN-13, UPC-A,
UPC-E, Code 39,
Codabar, Bookland,
Interleaved 2 of 5,
GS1-128, Code 128