manualshive.com logo in svg

SATO S84NX, Руководство оператора, Страница: 96 / 588

Поделиться
Скачать
SATO S84NX Скачать руководство пользователя страница 96

USB Interface Connection (Standard)

96

How to connect the host computer and the applicator to the product

 

•

Do not connect or disconnect the interface cables (or use a switch box) while power

is supplied to either the product or computer. This may cause damage to the interface

circuitry in the product or computer and is not covered by warranty.

•

Check the orientation of the connector before you make the connection.

 
1. Make sure that the product, host computer and applicator are powered off.

◦

Set the power switch of the product to the "O" position.

 
2. Connect the product to a host computer with one or more of the available interface connections.
3. Connect the applicator cable from the EXT connector of the product to the applicator.
 

USB Interface Connection (Standard)

Connect the interface cable when the product is powered off.
Connect the USB cable to the USB connector (Type B) (1) of the product.

Содержание S84NX













































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов