manualshive.com logo in svg

SATO S84NX, Руководство оператора, Страница: 81 / 588

Поделиться
Скачать
SATO S84NX Скачать руководство пользователя страница 81

81

Powering Off the Product

 

•

Do not power on or off the product, connect or disconnect the power cord while your

hands are wet. Doing so could cause an electric shock.

 

•

Do not power off the product during operation, such as when printing or updating.

Doing so could cause a malfunction of the product.

•

Do not disconnect the power cord until the powering off process is completed on the

product.

•

An incorrect power on/off operation may change or initialize the product's settings.

 

1. Make sure that the product is in Offline mode before you power off.

If "Online" appears on the screen, press the 

 button or 

 button to change to Offline

mode.

2. Press the power (I/O) switch to "O" position.

 

Содержание S84NX













































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов