manualshive.com logo in svg

SATO S84NX, Руководство оператора, Страница: 45 / 588

Поделиться
Скачать
SATO S84NX Скачать руководство пользователя страница 45

45

Operations When Errors Occur

When a product error occurs, an icon and message (the error and solution) for the error appear on the

display. When an error occurs, you can perform the following operations:

•

Change to Offline mode.

•

Cancel the error.

•

Feed the media.

•

Change to Settings mode.

•

Change to guidance video.

•

Change to the SOS error screen on which the QR code and phone number are displayed if the

SOS (SATO Online Services) is enabled.

 

•

The available operations vary, depending on the situation.

(1) Error Icon
(2) Error number
(3) Clear the error if allowed for the active error.
(4) Change to Offline mode if allowed for the active error.
(5) The icon appears when the Settings mode or guidance video is available.

The SOS icon appears when the SOS is enabled.

(6) Feed the media if allowed for the active error.
(7) Change to Settings mode or guidance video.

Change to the SOS error screen on which the QR code and phone number are displayed if the

SOS is enabled.

(8) When there are two icons on the area, select the icon by using 

/

 buttons. The selected

icon will be highlighted.

 

Содержание S84NX













































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов