SATO S84NX Скачать руководство пользователя страница 241

Страница: 241 / 588

241

Disabled

Disable the SDPL printer language.

[SEPL]

Enable or disable the SEPL printer language.
The options are as follows:
Enabled

Enable the SEPL printer language.

Disabled

Disable the SEPL printer language.

[SBPL]

SBPL (SATO Barcode Printer Language) is the common command that controls SATO barcode label

printers.
To use SBPL as a printer command, set the following items:

[Show Error]

Enable or disable the command error indication when incorrect command or parameter is detected in

the print data.
The options are as follows:
Enabled

The error screen is displayed. The print operation is paused.

Disabled

The error screen is not displayed, but the command error status icon appears in the status bar.

[Standard Code]

Set the protocol code.
The options are as follows:
Enabled

Use a standard code.

Disabled

Use a non-standard code.

•

A message prompting you to restart the product will appear on the Online/Offline

screen if you have made any changes. In such a case, reboot the product to apply the

settings. When [AUTO] is selected in the [Protocol] menu while [Disabled] is selected,

the setting will be changed to [Enabled].

Содержание S84NX












































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание S84NX

Отзывы:

SATO S84NX, Руководство оператора, Страница: 241 / 588

Результаты поиска

Содержание S84NX

Отзывы: