SATO S84NX Скачать руководство пользователя страница 103

Страница: 103 / 588

103

5. Select the interface using the

buttons.

[Network]

Sets the LAN connection and wireless LAN connection.

[RS-232C]

Sets the RS-232C connection.

[USB]

Sets the USB connection.

[NFC]

Sets the NFC connection.

[Ignore CR/LF]

Sets to ignore CR/LF codes.

[Ignore CAN/DLE]

Sets to ignore CAN/DLE codes.

[External I/O]

Sets the external signal (EXT).

[RFID] (S84NX only)

Sets the RFID.
Appears only for the RFID model.

6. Press the

button.

The settings items of the selected interface appear.

Change the settings according to the communication conditions of the connected network and

computer.

Configuring the Interface Settings Using the All-In-One Tool

When you use the All-In-One Tool, you can easily set and manage the product.

Содержание S84NX












































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание S84NX

Отзывы:

SATO S84NX, Руководство оператора, Страница: 103 / 588

Результаты поиска

Содержание S84NX

Отзывы: