SATO CW408, Руководство оператора, Страница: 55 / 120

Section 3: Operation and Configuration
CW408 Operator Manual Page 3-29
3.14 TEST PRINT MODE
The Test print mode offers six different printer status options for troubleshooting.
1. Make sure that the power of the printer is set to off.
2. While holding down the FEED button, press the power button. Release the power button when the
indicators come on. Keep holding the FEED button until the printer beeps.
3. TEST PRINT MODE SELECT is displayed on the screen. Press the LINE button to select the test print
contents as shown above. Press the FEED button to save the setting and proceed to the next screen.
4. SIZE SELECT screen will display for all MODE SELECT items except FONTS. Press the LINE to select
the size. Press the FEED button to save the setting and move to the next screen. To return to the MODE
SELECT screen, press the LINE and FEED buttons simultaneously.
5. Press the FEED button to start printing. Press the FEED button while printing to pause the test print
operation. Press the FEED button again to continue printing.
To exit the Test print mode
Make sure that the printer is in pause mode, press the power button to set printer to off.
Test print
TEST PRINT
MODE SELECT
FACTORY
TEST PRINT
MODE SELECT
FONTS
Displayed for all
above modes except
FONTS.
TEST PRINT
MODE SELECT
HEAD CHECK
TEST PRINT
MODE SELECT
BARCODE
TEST PRINT
MODE SELECT
SERVICE TEST
TEST PRINT
MODE SELECT
USER TEST
LINE + FEED button
FEED button
TEST PRINT
SIZE SELECT
LARGE SMALL
TEST PRINT
FEED->PRINT
Press and hold FEED button
+ Power button to on
FEED button
FEED button
TEST PRINT
PRESS FEED KEY
Preliminary