SATO CW408, Руководство оператора, Страница: 44 / 120

Section 3: Operation and Configuration
Page 3-18 CW408 Operator Manual
3.10 INTERFACE SETTING MODE
In this mode, you can set various parameters governing the use of different interfaces.
1. When the printer is in OFFLINE mode, press and hold the LINE and FEED buttons simultaneously for
more than three seconds. The printer switches to SETTING MENU mode. Then press the LINE button
twice to display I/F SETTINGS menu and press the FEED button to enter the menu.
2. INTERFACE SELECT is displayed first. Press the FEED button to switch to the next setting options as
shown above. To return to the previous setting option, press the LINE and FEED buttons simultaneously.
To return to the I/F SETTINGS screen, press and hold the LINE and FEED buttons simultaneously for
more than three seconds.
3. When the desired setting option is displayed, press the LINE button to select the item. Then press the
FEED button to save the setting and move to the next screen.
LINE + FEED button
for more than 3 secs
LINE + FEED button
for more than 3 secs
LINE + FEED button
LINE + FEED button
for more than 3 secs
FEED button
FEED button
LINE + FEED button
I/F SETTINGS
PROTOCOL
STATUS3
I/F SETTINGS
PROTOCOL
STATUS4
FEED button
LINE + FEED button
I/F SETTINGS
REPLY TIMING
CYCLE
I/F SETTINGS
REPLY TIMING
ENQ
FEED button
These screens are
displayed only when AUTO
SELECT or LAN is
selected for INTERFACE
SELECT menu.
These screens are
displayed only when
STATUS4 is selected for
PROTOCOL menu.
I/F SETTINGS
INTERFACE SELECT
LAN
I/F SETTINGS
INTERFACE SELECT
USB
I/F SETTINGS
INTERFACE SELECT
AUTO SELECT
SETTING MENU
I/F SETTINGS
SELECT SKIP
* Press the LINE button to select an item.
* Press the FEED button to save the setting and
move to the next screen.
* Press and hold the LINE and FEED buttons
simultaneously for more than three seconds to
revert to the I/F SETTINGS menu.
Preliminary