SATO ARGOX OS-200 Series, Руководство пользователя

Страница: 55 / 67

OS-214EX / OS-200
User Manual
49
5.2 Printer issues
The printer is not turned on

Did you attach the AC power cord?

Make sure the power supply’s connector is inserted into the printer power jack.

Check the power connection from the wall socket to the printer. Test the power
cord and the socket with other electrical devices.

Disconnect the printer from the wall socket, and connect it again.
The printer does not feed the media out

The media is not loaded correctly. See the “Loading Media” section to reload the
media.

If there is a paper jam, clear it.
I accidentally press the feed button while the printer module is opened

Close the printer module and press the FEED button.
5.3 Media issues
The media is out

Load a new media roll.
The paper is jammed

Open the printer and clear the jammed paper.

Make sure the paper is held properly by the Media Guides .