SATO ARGOX CP-EX Series, Руководство пользователя

Страница: 32 / 68

CP-EX / CX Series
User Manual
28
Compact Printer Series - User
’s Manual
Resetting Printer to Factory Defaults
Follow the steps below to reset printer to default settings:
1. Turn on the printer and wait till both "Ready" indicator and
"Power" indicator stay solid green.
2. Press the "FEED" button for 4 seconds, and the "Ready"
indicator and "Power" indicator will go off in order.
(at this step, if the “FEED” button is pressed for 8 seconds, printer
will reset first >> feed blank labels as media calibration >>
and then print configuration/ self-test labels.)
3. Once "Power" indicator becomes lit again, release the FEED
button.
4. "Ready" indicator will then become lit, too. At this moment,
the printer has resumed its factory default settings.
Printer will delete those print tasks received but not yet printed.
Note:
The printer factory default settings are stored in printer
’s flash;
these settings remain stored, without being erased even the printer
power is disconnected.