Satir UTR, Руководство пользователя

Страница: 14 / 22

SATIR UTR
12
press the “A” key to confirm. Press the “+” or “-” key to
select language as required and then press the “A” key to
save the setting and return to “SETUP” menu.
DEFAULT
SETTING
Press the “+” or “-” key to select “ DEFAULT SETTING ”
and then press the “A” key to confirm. Press “+” or “-”
key to select “CANCE” or “OK” and then press the “A” key
save the setting and return to “SETUP” menu. All setting
will be return to default settings.
VERSION
Press the “+” or “-” key to select “ VERSION ” and then
press the “A” key to check version information. Press the
“A” key again to return to “SETUP” menu.
3.4 Video output
Use the accessary video output cable (section 4.2.2) can output the
device’s video to the display device.
Video output port is on the left of the binocular and covered by rubber
waterproof cover. Open the waterproof cover and insert the 10-pin connectors
of the video cable into the video output port of the device with right direction.
Another connector of the video out cable connect to video output device. You
can use the video output accessory connector as required.
3.5 Binocular operation
The binocular can be separated from the device and connect to main body
via the cable to display the image and control the device.
3.5.1
Separation and combination of binocular and main body
A.
Separation of binocular and main body