User Manual
London – United Kingdom
www.saten.co.uk
UAE – Dubai
Fourth Floor, 30-31 Furnival Street
JAFZA - Al Aweer
Post code: EC4A 1JQ
TEL: +97143205447
TEL: +448456769185
FAX: +97143205448
Rebooting and Locking Your DVR
While in the Shutdown menu (Figure 1), you may also reboot or lock your DVR. Locking your DVR will
return you to the Live Preview mode, which will require a user name and password to exit out of it. The
Reboot button will reboot your DVR.
To reboot or lock your DVR:
1.
Enter the Shutdown menu by clicking Menu > ShutDown.
2.
Select the Lock button to lock the DVR or the Reboot button to reboot the DVR.
Using the Setup Wizard
Note:
Please make the DVR has been installed with HDD before access to the Setup Wizard.
By default, the Setup Wizard will start once the DVR has loaded, as shown in Figure 3. The Setup Wizard
will guide you through some important settings of your DVR. Select
Next
if the DVR has been installed
with HDD, or click
Cancel
to access Live View window if no HDD is installed.
Note:
If the checkbox is changed to
, then the Setup Wizard dialog box will not appear next time until
the factory default settings are resumed; and if you select the checkbox as
, the device will
automatically access the Setup Wizard dialog box when it starts up next time.
Figure 3. Setup Wizard
To start using the Setup Wizard:
1.
Click the
Next
button on the Wizard window. This will take you to the
User Permission
window, shown in Figure 4.
