Satel VERSA-KWRL2, Руководство пользователя

Страница: 8 / 14

6 VERSA-KWRL2 SATEL
3. Click on the “Delete
”
button.
4. The “Confirm” window will open.
5. Click on the “Yes” button.
6. The “Confirm” window will close.
7. Click on the “Write” button to save the changes to the controller and control panel.
3.2.2 Manipulator LCD
You can remove wireless keypads in the service mode by means of the “Remove device”
function (
 “2.Hardware”  “1.Kpds. & exps.”  “3.Wireless mod.”  “3.Remove device”).
1. Having started the function, use the and keys to select the keypad you want to
remove.
2. Press .
3. A prompt will be displayed asking you whether to remove the keypad and the serial
number of the keypad being removed.
4. Press .
4. Configuring
You can configure the wireless keypad settings by using a computer with DLOADX program
installed, or an LCD keypad.
4.1 Settings stored in ABAX 2 / ABAX controller
The settings can be configured:

DLOADX program:

“VERSA – Structure” window

“Hardware” tab

“Expansion
modules” branch 
[controller name]
 “LCD-WRL” tab (see: Fig. 3),

LCD keypad:

“Service mode”

“2.Hardware”

“1.Kpds. & exps.”

“3.Wireless dev.”
 “2.Config.device” 
[wireless keypad name]
.
4.1.1 Description of parameters and options
Presence contr.
– if this option is enabled, the keypad presence is being monitored. If there
is no transmission from the keypad for 20 minutes, missing keypad will be reported.
Wake-up
[Wake up] – the maximum time period for which the keypad can be woken up
automatically. If you enter a value different from 0:
– the keypad will be woken up automatically when an alarm occurs or an entry delay or an
exit delay begins,
– the CHIME from zones will also be signaled when the keypad is in the sleep mode.
If you enter 0, the keypad will not be woken up automatically.
If a value different from 0 is preset for the “Wake-up” parameter, the keypad will
be awaiting for transmissions with information on events. As a result, the
energy consumption will be growing and the battery life will be considerably
reduced.
The keypad is woken up not more frequently than every 30 seconds. If the event that
is to wake up the keypad occurs before the 30 seconds have elapsed since the last
automatic wake-up, the keypad will stay asleep.
Card reader
– if this option is enabled, the card reader is supported.