SATEL
INT-TSG2
9
If you tap
before you enter the code, the on-screen keypad will close and you will return
to the previous screen.
By default, the following codes are programmed in the INTEGRA series control panel:
service code: 12345
object 1 master (administrator) code 1: 1111
By default, the following codes are programmed in the VERSA series control panel:
service code: 12345
user 30 code: 1111
If there is an alarm in the system, it will be cleared after you enter the code.
9. User menu
Swipe up on the user screen / additional screen to go to the user menu. Since the access to
the user menu is code-protected, the keypad will open first. Enter the code. The menu will
open immediately if you have already logged in on the user screen.
9.1 User menu home screen
9.1.1 INTEGRA system
Fig. 5. User menu home screen in the INTEGRA system.
The following functions are available on the user menu home screen.
tap to go to the “Partitions” screen.
tap to go to the “Zones” screen.
tap to go to the “Outputs” screen.
tap to go to the “Troubles” screen. The function is available when a trouble is
signaled by the alarm system.
tap to go to the “Events” screen.
