14 INT-TSG
SATEL
Quit
– click to cancel reading or writing the macro command related data.
Reset
– click to delete all the defined macro commands (and restore factory default settings).
Export to file
– click to export defined macro commands to a file. The file with macro
commands can be imported to another INT-TSG keypad.
Import from file
– click to import macro commands from a file.
Save icons on SD card
– click to write icons to the microSD memory card (all icons
available in the D
LOAD
X program will be written). The microSD card must be inserted in the
computer memory card reader (after clicking the button, indicate the card location).
Definitions
Fig. 7. D
LOAD
X program: “Definitions” tab.
You can create and configure macro commands in the “Definitions” tab. The macro command
is a sequence of actions, composed of single commands, which are to be done by the control
panel when running the macro command.
New macro
– click to create a new macro command.
Remove macro
– click to delete selected macro command.
Name
– individual name of the macro command (up to 16 characters in two lines, up to 8
characters in the line).
Code
– the code which is to be used for authorization when executing commands contained
in the macro command. For execution of such commands to be possible, the code must be
granted a suitable authority level. It is presented as a string of asterisks.
If, when running a macro command, it turns out that the code is invalid (e.g. it has
been changed in the meantime), the user will be able to enter the correct code. It will
be automatically saved to the keypad memory (replacing the invalid one).