SATEL INT-TSG
13
Icon
– icon of a group of macro commands. In order to display the list of available icons, click
the
button.
Fig. 6. D
LOAD
X program: “Groups” tab.
Macro available on the status screen
– if this option is enabled, the group of macro
commands is available from the status screen, i.e. touching a corner of the status screen
will display macro commands assigned to that group (1
st
group of macro commands –
upper left corner; 2
nd
group of macro commands – upper right corner; 3
rd
group of macro
commands – lower left corner; 4
th
group of macro commands – lower right corner).
Icon visible on the status screen
– if this option is enabled, the icon of the group of macro
commands is displayed in the corresponding corner of the status screen. The option is
available when the M
ACRO AVAILABLE ON THE STATUS SCREEN
option is enabled for the group
of macro commands.
Add macro
– the button is available after you click on a group of macro commands. It
displays a list containing the names of defined macro commands. After you click on
a name, the macro command will be added to the group.
Remove macro
– the button is available after you click on any macro command. It removes
that macro command from the group.
– click to move the highlighted macro command down within the group.
– click to move the highlighted macro command up within the group.
Read
– click to read the macro command related data from the keypad.
Write
– click to write the macro command related data to the keypad.