Satel INT-KNX-2 Скачать руководство пользователя страница 1

 

 

INT-KNX-2 

KNX INTEGRATION MODULE 

int-knx-2_en 03/15 

The INT-KNX-2 module integrates the INTEGRA / INTEGRA Plus alarm system with the KNX 
system. Using the module, the control panel can control the actuators connected to the KNX 
bus, and the bus devices can control the alarm system. This manual applies to the module 
with firmware version 2.00, which is supported by the INTEGRA and INTEGRA Plus control 
panels with firmware version 1.13 of 2015-03-11 (or newer). 

1  Features 

  64 KNX communication objects. 

  Expansion of the alarm system by adding virtual outputs dedicated to control the KNX 

devices. 

  The number of virtual outputs determined by means of DIP switches (from 8 to 64 – a 

multiple of 8). 

  Capability to control the KNX devices with macro commands. 

  Alarm system control by means of KNX devices (via the alarm system zones). 

  Bus Coupling Unit for direct connection of the module to the KNX bus. 

  NC type tamper input. 

  Connectable to RS-485 bus (firmware update through the bus). 

2  Specifications 

Supply voltage ................................................................................................... 12 V DC ±15% 
Standby current consumption ..........................................................................................43 mA 
Maximum current consumption........................................................................................50 mA 
Environmental class according to EN50130-5 ......................................................................... II 
Operating temperature range.............................................................................-10 °C...+55 °C 
Maximum humidity.......................................................................................................... 93±3% 
Dimensions ............................................................................................................. 80 x 57 mm 
Weight................................................................................................................................. 32 g 
 
 

The declaration of conformity may be consulted at www.satel.eu/ce 

 

Содержание INT-KNX-2









Отзывы: