SATEL
ARU-200
3
2. Electronics board
RS-232 (TTL) port.
battery.
tamper switch (NC).
battery connector.
bicolor LED indicator of the repeater status:
normal operation
– ON in green;
communication with the controller
– flash in red;
230 VAC power trouble
– flashing in green.
230 VAC terminals.
3. Installation and start-up
Disconnect power before making any electrical connections.
There is a danger of battery explosion when handling the battery improperly.
The used batteries must not be discarded, but should be disposed of in
accordance with the existing rules for environment protection.
The repeater should be installed indoors, in spaces with normal air humidity.
