Satec C191HM, Инструкция по установке и эксплуатации

Страница: 56 / 63

Chapter 6 Viewing Status Information 47
Chapter 6 Viewing Status Information
6.
Through the Status Information Menu (StA) , it is possible to view the status of various
instrument features.
6.1 The Status Information Menu
To enter the Status Information Menu :
From the display mode, press to enter the Primary Selection Menu .
Press to activate the StA window.
Press . .
To select a display page:
Press the up/down arrow keys to scroll through the display pages.
To quit the menu and return to the display mode:
Press or .
Front Panel Display
When you are in the Status Information Menu , the front panel display is updated
approximately four times per second and shows you a wide variety of status
information that you can review by scrolling through display pages.
The status parameters are designated by the abbreviated labels in the upper
and/or middle window. The upper window flashes, indicating that you are in the
menu display.
Fast Reset of Counters
When changing data via the front panel is not secured by a password, you can
reset the counters from the
Status Information Menu display without entering the
reset menu:
Select a display page where the counter you want to reset is displayed.
While holding the key, press and hold for about 5 seconds.
The displayed data is reset to zero.
6.2 Status Display Formats
Table 6-1 lists all the displays available from the Status Information Menu . The
display windows are labeled in the table as follows: 1 = upper window, 2 =
middle window, 3 = lower window.
SELECT
SELECT
ENTER
ENTER ESC
SELECT
ENTER
SELECT
StA
ENTER