manualshive.com logo in svg

Satec C191HM, Инструкция по установке и эксплуатации

Поделиться
Скачать
Satec C191HM Скачать руководство пользователя страница 32

 

Chapter 4  Setup Menus 

23 

 

4.3  Digital Input Setup Menu  

       

 

       

This menu is used to set up a digital input provided by the 

C191HM

. 

The digital input can be configured as: 

-  a 

status input

 to monitor external contact status, or  

-  an 

external synchronization pulse input

 to receive an external 

synchronization pulse indicating the beginning of a new demand interval 
for power demand measurements.  

The setup menu is used for allocating an external synchronization pulse input. If 
you do not allocate the digital input as an external synchronization input, it is 
automatically configured as a status input  

External 
synchronization 
input  

To change the digital input allocation: 

 Press                to activate the middle window. 
 Use the up/down arrow keys to set the input allocation 

status. 

 Press                to store your new inputs allocation. 
 Press            to leave the allocation unchanged or to quit 

the menu.  

 “1” indicates that the input is allocated as the external synchronization pulse 
input; “0” indicates that the input is allocated as the status input. 

NOTES 

1.  A digital input configured as the status input can be monitored via the 

Status 

Information Menu 

(see Chapter 6) and communications.  

2. 

If the digital input has been allocated as the external synchronization pulse input, 
synchronization of the demand interval through communications is not available. 

E.Snc 

 

         1

 

ENTER

SELECT

ESC  

SELECT

 

CHG

 

dinP

ENTER

 

ENTER

 

Содержание C191HM
































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды