Satcube Ku User Manual v2.0-2019
SATCUBE PROPRIETARY
v.
SECURITY KEY:
The current password required to connect to the WIFI network. The
default password is
satcube123
. As this information is publicly available, we advise
you to change the password to prevent unauthorized access to the WIFI network.
vi.
SAVE:
Stores the current settings and uploads them to the terminal.
SETTINGS | NETWORK
•
MANUAL SETTINGS:
Checking this box allows the user to set the following settings to the
terminal. Terminal is recommended to not use manual settings but to take an IP address
from the modem. This enables functionality otherwise not accessible as is described in
Section 7 d).
•
IP ADDRESS:
Ip address of the Satcube terminal.
•
MASK:
Netmask assigned to the Satcube terminal.
•
GATEWAY:
The gateway that was assigned to the Satcube terminal-
•
DHCP ENABLE:
Enables a DHCP server on the Satcube terminal
•
DHCP START:
The first address that will be assigned through the DHCP server.
•
DHCP END:
The last address that will be assigned through the DHCP server.
•
DNS SERVER:
The DNS that the DHCP server will assign to DHCP clients.
Figure 35 The NETWORK configuration page in the GUI.
Содержание Ku
Страница 1: ...Satcube Ku User Manual ...
