background image

5

"

/6

"

 LED 

DOWNLIGHT RETROFIT

Model: S11801

Satco Products, Inc.

Brentwood, NY 11717

INSTALLATION AND SAFETY INSTRUCTIONS

© Copyright 2019 Satco Products, Inc.  6/19

Before installation, select your preferred 

CCT by moving the switch to either 

2700K, 3000K, 3500K, 4000K or 5000K.

Connect LED downlight trim to 

the Edison base adaptor.

Gently squeeze together the torsion 

springs of the LED trim and insert into 

the recessed housing.

Gently push up the LED downlight until 

wires are exposed.

 

Turn on power.

Screw adaptor into socket in recessed 
housing.

3.25

7.5

5.2

2700K

3000K

3500K

4000K

5000K

INSTALLATION:

1   

Turn off power prior to installation.

  

Remove the diffuser and existing bulb  

if necessary. Remove the existing trim.

4   

5    

    

6

INSTALLATION:

2    

    

3

Dimensions:

NOTE 1: 

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to  

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in  

a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed  

and used in accordance with the instructions, may cause harmful interference to radio communications. However,  

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful  

interference to radio or television reception, which can be determined by turning the equipment off and on, the user  

is encouraged to try to correct the interference by one or more of the following measures:

– Reorient or relocate the receiving antenna. 

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

NOTE 2: 

 

could void the user’s authority to operate the equipment.

WARRANTY

This product is guaranteed for a 5 year warranty. Any quality issue in normal 

use within the warranty period, will be repaired or replaced according to the situation and under 

dimmer compatibility information.

WARNING: 

Risk of Fire or Electric Shock

  

•    

•    

•  TURN OFF the electrical power before proceeding.

•   Install this kit only in luminaires that have the construction features and dimensions shown in  

exceed the input rating of the luminaire.  

•       To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other 

sharp objects.

•      Do not make or alter any open holes in an enclosure of wiring or electrical components during 

kit installation.

•      

combination shall be determined by authorities having jurisdiction. (Sold to Canada only.)

•  This device is not intended for use with emergency exits.

Отзывы: