ASSEMBLY INSTRUCTION
SKU#60/492
※
Installations for hanging pendant
1.
Carefully unpack the fixture, lay out all parts on a clean surface.
2.
Attach the Cross Bar to Outlet Box using the Outlet Box Screws provided.
3.
Thread the Loop A to the Nipple that inside of the fixture’s Canopy.
4.
Using two pliers twist open the links at the two ends of the Chain. Hook one link to Loop A and the other
link to Loop B. Close the links.
5.
Weave the fixture wires up through Loop A, through the chain and through the Canopy.
6.
Tie ground wire from fixture and from Outlet Box to the Ground Screw on the Cross Bar. Position wires back
inside Outlet Box.Connect the wire with writing on it from fixture to the black wire from the supply circuit.
Connect the wire without writing on it (with raised ribs) from fixture to the white wire from the supply circuit.
Cover the connections using provided Wire Connectors.
7.
Hold the fixture and place the Canopy to the Outlet Box by aligning the protruding Mounting Screws all the
way through the Canopy Holes and thread the 2 Lock Nuts to the Mounting Screws until the Canopy is
firmly held against ceiling.
8.
Install the bulbs. (Included) Twist to lock the Glass Shade to the Fixture Body as drawing shown.
9.
Fasten Screws into the Fixture Body using the provided Cap Nuts.
10.
Turn on the power.
A Satco Product
