SATA SATAjet 4800 K spray mix, Руководство по эксплуатации

Страница: 149 / 631

149
EN
Operating instructions SATAjet 4800 K spray mix Operating instructions SATAjet 4800 K spray mix
SATAjet 4800 K spray mix
Recommended spray gun inlet pressure
2.0 bar - 3.0 bar
Max. spray gun inlet pressure
10.0 bar
Max. material pressure
250.0 bar
Air consumption flat fan
(at 3.0 bar/43.5 psi input pressure)
120 Nl/min
Air consumption round fan
(at 3.0 bar/43.5 psi input pressure)
310 Nl/min
Max. temperature of the spray medium 60 °C
Recommended spraying distance
18 cm - 25 cm
Compressed air connection
1/4" male thread
Material connection M16x1.5
Weight with material sieve and material nozzle
760 g
8. Assembly
Warning!
Risk of injuries from components coming loose or leaking
material.
The high operating pressure can make components come loose or ma-
terial can leak unexpectedly around the material connection.
→ Rate all components around the material connection to the maximum
operating pressure.
→ Use SATA material hoses.
Warning!
Risk of injuries from components coming loose or leaking
material.
If assembly work is performed while the gun is still connected to the
compressed air circuit and material supply, components can unexpect-
edly work loose and material can leak.
→ Disconnect the spray gun from the compressed air circuit and the
material supply before any cleaning work.
→ Depressurise the system.