manualshive.com logo in svg

SAS Scalable Performance Data Server 4.5, Руководство администратора

Поделиться
Скачать
SAS Scalable Performance Data Server 4.5 Скачать руководство пользователя страница 85

Type

 - the type of resource (for example, DATA, CATALOG, VIEW, or MDDB). The

Type

 field cannot be changed directly. To change the 

Type

 value, delete the current

resource and then add a new one.

Column

- the column name, if the resource is limited by a column constraint. The column

name cannot be changed directly. To change the column name, delete the existing resource
and then add a new one.

Persist

 - a Boolean flag. When set to Yes, 

Persist

 indicates that the ACL resource definition

continues to exist if the referenced resource is deleted. When the 

Persist

 setting is left

blank, the ACL resource definition is deleted when the referenced resource is deleted.

Name

 - name of a user or group to which the Read, Write, Alter, and Control permissions

are applied for this resource. 

Universal

 represents the default setting for all unnamed

groups or users.

Read

 - if selected, the specified user/group has permission to read this resource.

Write

 - if selected, the specified user/group has permission to write to this resource.

Alter

 - if selected, the specified user/group has permission to alter this resource.

Control

 - if selected, the specified user/group has permission to modify permissions of

other users and groups associated with this resource.

Adding an ACL Resource

To add an ACL resource, click 

Add ACL

 in the ACL Manager of the SAS Management

Console window, and then complete the values in the Add ACL window.

Resource

 - the name of the resource to add.

Column

 - the column restrictions for the resource to be added. If there are none, leave

blank.

Type

 - the type of resource (for example, DATA, CATALOG, VIEW, or MDDB).

Persist

 a Boolean flag. When set to Yes, 

Persist

 indicates that the ACL resource definition

continues to exist if the referenced resource is deleted. When the 

Persist

 setting is left

blank, the ACL resource definition is deleted when the referenced resource is deleted.

Generic

 - select if the resource name is a generic name.

Adding an ACL Resource

79

Содержание Scalable Performance Data Server 4.5
















































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды