Sartorius PMA.Evolution EVO1Y1, Руководство по установке

Страница: 8 / 81

3.9 Warm-up Time
Using a Scale Verified for Use in Legal Metrology:
Ensure that there is a warm-up time of at least 24
hours after initial connection to the power supply.
0
30
To ensure accurate results are
delivered, the scale must warm up
for at least 30 minutes after initial
connection to the power supply.
Only then will the device have
reached the required operating
temperature.
4 Cleaning and
Maintenance
4.1 Cleaning
Before cleaning the AC adapter or the scale: Disconnect all
devices from the power supply.
WARNING Electrical Hazard from Voltage or
Current
Disconnect the AC adapter (if connected) from the mains.
Unplug any connected data cables from the PC. Never open
the scale or the AC adapter. The parts contained in these
devices cannot be cleaned, repaired, or replaced by the user.
NOTICE
Do not clean the following parts with acetone or aggressive
cleaning agents:
− Mains socket
− Data interface
− Labels, and all other plastic parts
Procedure
t
Disconnect the device from the power supply.
t
NOTICE Make sure that no liquid or dust gets into the
scale or the AC adapter.
t
NOTICE Corrosion or damage to the device due to
unsuitable cleaning agents!
t
Do not use corrosive, chloride-containing, and
aggressive cleaning agents.
t
Do not use cleaning agents that contain abrasive
ingredients, e.g. scouring agents, steel wool.
t
Only use soft brushes and cloths for cleaning.
t
Do not use solvent-based cleaning agents.
Cleaning the Control Panel
t
Before cleaning the control panel: Turn off the device as
touching the screen could trigger unwanted inputs.
Cleaning the Device Housing
t
Wipe off the housing with a slightly damp cloth. For more
severe contamination, use a mild soap solution.
t
Wipe the device with a soft cloth.
4.2 Servicing
To ensure the continued accuracy of your scale, we
recommend scheduling regular servicing at least once a year.
Sartorius Service offers different service contracts with
maintenance intervals that are tailored to your needs.
A calibration certificate should always be issued as part of
every maintenance session. Safety inspections of the AC
adapter and its connections must be performed at appropriate
intervals by a qualified electrician (e.g., every 2 years).
5 Disposal
5.1 Information on Decontamination
The operator is responsible for adhering to local legislation on
the proper declaration of transport and disposal and the
proper disposal of the device.
WARNING
Risk of injury due to contaminated devices!
Devices contaminated with hazardous materials (NBC
contamination) will not be accepted for repair or disposal.
5.1.1 Information on Disposal
The device and its accessories
do not
belong in your regular
household waste, since they are made of high-grade materials
which can be recycled and reused. All parts must be disposed
of properly by disposal facilities. The packaging is made of
environmentally friendly materials that can be used as
secondary raw materials.
5.1.2 Disposal
Requirements
The device has been decontaminated.
Procedure
t
Dispose of the device. Follow the disposal instructions
on our website (www.sartorius.com).
t
Dispose of the packaging in accordance with local
government regulations.
8 Installation Instructions EVO1Y1