Sartorius EVO1Y, Руководство по эксплуатации

Страница: 30 / 51

30 EVO1Y | LAB1Y Operating Instructions
Operation
Changing the Password
The password is numeric and can have up to six digits. Entering six spaces deletes the password, which deactivates the password
function. This restores the device to its original setting (scale is not password-protected).
t
Access the Setup menu (see Chapter 6.7.2.1, page 27).
Level 1 Level 2 Level 3
INPUT
t
Press
O
/
P
, select
INPUT
, press
!
| - - -
PASSWD.
t
Press
O
/
P
, select
PASSWD.
, press
!
| - - -
OLD PW
| - - -
| - - -
| - - -
| - - -
| - - -
| - - -
| - - -
y
When an old password is active,
OLD PW
appears briefly so that you can enter the old password.
y
This appears “
_ _ _ _ _ _
.”
y
The first line flashes.
t
Make the following inputs:
−
O
/
P
keys: Selects numbers 0 to 9.
−
§
: Go back to the previous number.
−
!
: Confirm entry or go to the next number.
t
Repeat to enter the remaining numbers.
y
If you make an incorrect entry,
NOT OK
appears. Press
!
and reenter the old password.
NEW PW
y
When you make a correct entry,
NEW PW
appears briefly so that you can enter the new password.
y
This appears “
_ _ _ _ _ _
.”
y
The first line flashes.
t
Make the following inputs:
−
O
/
P
keys: Selects numbers 0 to 9.
−
§
: Go back to the previous number.
− You can enter spaces to delete the number/password.
−
!
: Confirm entry or go to the next number.
t
Repeat to enter the remaining numbers.
y
The password has been changed.
t
Press
§
several times to exit the menu.
6.7.2.7 Resetting the Scale: “RESET”
If required, you can restore the scale to its factory settings.
Note:
If you have activated the password function, this feature is password-protected.
t
Access the Setup menu (see Chapter 6.7.2.1, page 27).
Level 1 Level 2 Level 3 Level 4
SETUP
t
Press
O
/
P
, select
SETUP
, press
!
| - - -
GEN.SRV. t
Press
O
/
P
, select
GEN.SRV.
, press
!
| - - -
MEN.RES.
t
Press
O
/
P
, select
MEN.RES.
, press
!
|- - -
DEFAUL.
t
Press
O
/
P
, select
DEFAUL.
|- - - o
NO t
Press
!
, “o” appears
y
The factory settings are loaded
t
Press
§
several times to exit the menu