Entris
®
BCE Operating Instructions
15
Installation
5.3 Unpacking
Procedure
t
Unpack the device .
t
If the device is stored temporarily: Observe the storage
information (see Chapter 13 .1, page 33) .
t
Keep all parts of the original packaging, e .g . to return the
device .
5.4 Removing the Transport Lock
Procedure
1
t
Remove the transport locks (1)
and retain them for later use .
5.5 Assembling the Device
Procedure
3
2
1
t
Place the frame draft
shield (1) on the balance .
t
Attach the shock absorbers (2) .
t
Place the weighing pan (3)
on top .
5.6 Acclimatizing the Device
When a cold device is brought into a warm environment:
The temperature difference can lead to condensation from
humidity in the device (moisture formation) . Moisture in the
device can lead to malfunctions .
Procedure
t
Allow the device to acclimatize for approx . 2 hours at the
installation site . The device must be disconnected from the
power supply beforehand .
