Sartorius Arium H2O-ARST-P-B, Руководство по эксплуатации

Страница: 28 / 76

Operating Design
28 Arium
®
Smart Station Operating Instructions
Level 1 Level 2 Level 3 Description
Settings
Display brightness Changes the brightness of the operating
display.
Reset settings Resets the dispensing unit to the default
settings, e.g., temperature display.
Role
management
Admin Opens the defined role for the
administrator or service.
Service
Dispensing
Opens the dispensing mode.
Care
Replace final filter − Starts the wizard for replacing a final
filter.
Perform venting − Starts the wizard for the venting
process.
− Fills and rinses the device during a
venting process.
Perform
depressurization For “Pure” version only: Starts reducing
the pressure for the dispensing unit.
4.11 Parameter List
4.11.1 Parameters in the “Information” Menu
Parameter Setting Values Explanation
Device
information Arium
®
water treatment
device
Displays the following information:
− Device description
− Model code
− Serial number
− Software versions
− MAC addresses
Arium
®
Smart Station n Displays the following information:
− Device description
− Model code
− Serial number
− Software versions
− MAC addresses
Measured values “Ultrapure” version Displays the conductivity, water temperature, and the TOC
value.
“Pure” version Displays the conductivity and water temperature.
Dispensed water For “Ultrapure” version only: Displays the volume of water
dispensed by the dispensing unit of the connected Arium
®
water treatment device.