Microvette
®
100/200
User Guide
All patient blood specimens should be
treated with standard precautions.
Wear gloves!
1.
Collect blood with the assembled
End-to-End 100 μl or 200 μl capillary.
For collection, best results are achieved
if the Microvette
®
is held in horizontal or
slightly inclined position.
During blood collection, hold the capillary
3 to 5 mm away from the puncture site.
2.
Collection is complete when the
End-to-End capillary is entirely filled
with
blood.
3.
Hold the tube upright to allow the blood
to flow from the capillary into the
Microvette
®
.
4.
Turn the cap to remove and discard the
preassembled capillary as one unit.
5.
Remove the cap from the base and seal
the
Microvette
®
(’click’ position).
6.
Mix sample thoroughly by inverting
the
Microvette
®
.
1
2
3
4
5
6
264_d_haha_microvette_GB_0316.pdf 1
11.03.16 14:30
