Top Jamb
Installation
See Page 5
Right Hand Door - RH
Left Hand Reverse - LHR
Left Hand Door - LH
Right Hand Reverse - RHR
Right Hand Door - RH
Left Hand Reverse - LHR
Right Hand Door - RH
Left Hand Reverse - LHR
Regular Arm
Installation
See Page 2
Left Hand Door - LH
Right Hand Reverse - RHR
Left Hand Door - LH
Right Hand Reverse - RHR
Top Jamb
Installation
See Page 5
Regular Arm
Installation
See Page 2
Parallel Arm
Installation
See Pages
3 & 4
Parallel Arm
Installation
See Pages
3 & 4
CA
UTION
CA
UTION
An Incorrectly installed or improperly adjusted
door closer can cause property damage or
personal injury. These installation instructions
should be followed to avoid the possibility of
misapplication or misadjustment.
Installation Instructions
80-9311-0011-021 Rev 2
Non Hold Open Models
Adjustable
(Sizes 1 thru 6)
1131
Non Handed Door Closer
1130 Series
Doors should be hung on ball bearing or
anti-friction hinges.
A separate door stop is recommended.
Door and frame must be properly
reinforced.
Adjust closing time speed between 3 and 7
seconds from 90° to 0°.
These door closers should NOT be
installed on the exposed side (weather
side) of exterior doors.
3/16"
#7
1/4-20
Spring Power Adjustment
Screw 1131 Series
"BC" Valve
Pinion Cap
Closer
Size
Stamp
"L"Valve
"S"Valve
Standard Components
Optional Components
1-6
Closer Body
Co
ver
Sleeve Nut and Bolt
Drill 9/32 thru from Closer Side
3/8 Drill other side
(Optional)
Metal
Wood
RU Soffit Plate
Used with Parallel
Arm Closers Only
Soffit Plate
Regular Arm/Top
Jamb Shoe
Main Arm
Connecting Rod
Forearm
Screw
Arm Slide
Arm Assembly
Machine Screws
#7 Drill, 1/4-20 Tap
Self Drilling Screws
Wood and Metal
For Wood drill 3/16 hole
A7674C
Copyright © 2016, Sargent Manufacturing Company, an ASSA ABLOY Group company, All rights reserved. Reproduction
in whole or in part without the express written permission of Sargent Manufacturing Company is prohibited.
