07-01955E F479-230V/78-006 AU
6
Legend Brands, Inc.
Remove the cover assembly and inspect the recovery
tank for any remaining water. If necessary, wipe out the
tank with a towel.
Loosen hose clamp on float valve assembly and slip off
assembly.
Loosen cord clamp on inside wall of tank with the 15/16
in. wrench. Cut cable tie and pull out two to three feet of
cord or until the cord shows resistance.
Remove float ball assembly.
Note: It is not necessary to remove the float ball
assembly to access the pump. However, we recommend
removing the assembly and cleaning it every time you
inspect and clean the pump.
To remove the float ball assembly, loosen lower hose
clamp on the float ball assembly and remove assembly.
