Coat-Endure
User Manual & Datasheet V 3.0
ENTER
COAT-ENDURE
ON
3
4
5
6
1
2
COVER
UNCOVER
CALIBRATE
HI CALIBRATE
FS1
FS2
RELAY 1
RELAY 2
SENS
ITIVITY
1
2
3
4
5
6
CLOSE
Lo
Figure 30: Switch Position
2. Press and hold the ENTER key until the STATUS LED
blinks.
ENTER
COAT-ENDURE
ON
3
4
5
6
1
2
COVER
UNCOVER
CALIBRATE
HI CALIBRATE
FS1
FS2
RELAY 1
RELAY 2
SENS
ITIVITY
1
2
3
4
5
6
CLOSE
Lo
Figure 31: Setting Default Value
3. Set the CALIBRATE, COVER and UNCOVER switches
back to OPEN position.
ENTER
COAT-ENDURE
ON
3
4
5
6
1
2
COVER
UNCOVER
CALIBRATE
HI CALIBRATE
FS1
FS2
RELAY 1
RELAY 2
SENS
ITIVITY
1
2
3
4
5
6
CLOSE
Lo
Figure 32: Saving Default Value
4. This will set the time delay to 0 and the sensitivity level
to 3.
17
Output Options
Depending on the selection mode for output, the two re-
lay outputs can also operate independantly for two different
switch points. Refer to Order Code
•
All keys should be in the OPEN position.
•
To see the output mode, press and hold ENTER key.
•
If the only the first LED lights up, Coat-Endure is oper-
ating in the single point switching mode.
18
Error Indication
On error, the status LED starts blinking RED and GREEN
alternately at a faster rate. Normal LED blinks are always
at the rate of 1 blink per second, in either RED or GREEN
color. In some cases, a GREEN or a RED blinking could
ENTER
COAT-ENDURE
ON
3
4
5
6
1
2
COVER
UNCOVER
CALIBRATE
HI CALIBRATE
FS1
FS2
RELAY 1
RELAY 2
SENS
ITIVITY
1
2
3
4
5
6
CLOSE
Lo
Figure 33: Single Point Switching without Material
indicate an error. Refer to Table 5 for a list of errors and
their indication.
19
Customer Support
Thank you for going through the instructions given in this
manual. To further ease the process of installation and use,
we have developed special demo videos which are hosted
on YouTube.
Sapcon’s YouTube channel, SAPCON INSTRUMENTS,
lists all these videos: https://goo.gl/dnxfcz
Should you require further information regarding installa-
tion, use or working of the instrument, please don’t hesitate
to contact us. Kindly provide the following information at the
time of contacting:
•
Instrument Model and Serial Number
•
Purchase Order Number and Date of Purchase
•
Description of the query
•
Your contact details
In an attempt to serve you better, we are open seven days
a week (9:30am to 7:30pm). We are available at:
•
•
•
+91-731-4757575
Sapcon Instruments Pvt.Ltd.
R
13
