Other Information
17
Most problems you encounter with your TV can be
corrected by consulting the following troubleshooting list.
1. Adjust the position and orientation of the indoor/outdoor
antenna.
2. Check the connection of antenna.
3. Fine tune the channel.
4. Try another channel. Broadcasting failure may happen.
1. Check if the fuse or circuit breaker is working.
2. Plug another electrical device into the outlet to make
sure it is working or turned on.
3. Power plug is in a bad contact with the outlet.
4. Check the signal source.
Black spots or horizontal streaks appear, or the picture
flutters or drifts. This is usually caused by interference
from car ignition system, neon lamps, electric drills, or
other electrical appliance.
Troubleshooting
No picture, no sound
Ignition
This interference produces moving ripples or diagonal
streaks, and in some case, loss of contrast in the picture.
Find out and remove the radio interference source.
Radio frequency interference
1. Change the color system.
2. Adjust the saturation.
3. Try another channel. Black-white program may be
received.
No color
1. Change the batteries.
2. Batteries are not installed correctly.
3. Main power is not connected.
Remote control does not work
1. Adjust the brightness and contrast.
2. Broadcasting failure may happen.
No picture, normal sound
1. Press the
Vol+
button to increase volume.
2. Volume is set to mute, press the mute button to restore
sound.
3. Change the sound system.
4. Broadcasting failure may happen.
Normal picture, no sound
It is usually caused by local interference, such as cars,
daylight lamps and hair driers. Adjust the antenna to
minimize the interference.
Unorderly ripples on the picture
Perhaps the TV can not recognize the resolution set by
the PC. Suggest to change to the best resolution or other
standard resolutions of the Windows system.
Blank screen in PC mode
If the antenna is located in the fringe area of a television
signal where the signal is weak, the picture may be marred
by dots. When the signal is extremely weak, it may be
necessary to install a special antenna to improve the
reception.
Snowy dots and interference
resources,
1. Lead (Pb) – not over 0.1% by weight;
2. Cadmium (Cd) – not over 0.01% by weight;
3. Mercury (Hg) – not over 0.1% by weight;
4. Hexavalent chromium (Cr
6+
) – not over 0.1% by weight;
5. Polybrominated biphenyls (PBBs) – not over 0.1% by weight;
6. Polybrominated diphenyl ethers (PBDEs) – not over 0.1% by weight.
https://www.sanyoappliance.in/e-waste-program/
Customer care number ( Toll free ) : 1800 419 5088
Please see the Sanyo website for further information on collection centers,etc.
Declaration of Conformity with the requirements of the E - Waste (Management) Rules-2016
The Product is in conformity with the requirements of the reduction of hazardous substances
The content of hazardous substance with the exemption of the applications listed
in SCHEDULE II
of the E-Waste Rules-2016
of the E-Waste Rules-2016
or call the customer care toll-free number
Sanyo
