Sanyo VHR-M340, Инструкция по эксплуатации

Страница: 20 / 38

CHANGING THE MENU LANGUAGE
English, Spanish or French can be selected by the user.
œ
Turn on the power (TV and VCR).
œ
Set the TV to channel 3 or 4.
œ
If the VCR indicator is off, press the TV/VCR button
on the remote control.
The VCR indicator lights.
1
Press the MENU button.
The main MENU appears.
2
Press the ù (or û ) button to select the Language
select option, then press the OK button.
3
Press the
ù
(or
û
) button to select the language of
your choice, then press the OK button.
The Language select menu disappears, and the
on-screen menu language has been selected.
PROGRAMMING CHANNELS
Once the initial setup is completed, the channels can be
programmed again. This may be necessary if you are
switching from cable service to antenna reception.
NOTES:
œ Make sure the antenna or cable connections are
correct. (See pages 8 and 9.)
œ
If the input source is set to L1, press the INPUT button
on the remote control until the channel number appears
on screen.
Channel Programming
1
Follow the steps in Before starting above.
2
Press the MENU button.
The main MENU appears.
3
Press the ù (or û ) button to select the VCR setup
option, then press the OK button.
The VCR setup menu appears.
CATV/TV@@@@@@@ z CATV@TV
Cable@box@@@@@ z No@@@Ch02
Child@Lock@@@@@On@@
z
Off
Off@timer@@@ z Off@2Hr@6Hr
[ ùû ]†Option
[<>]†Select@@@[MENU]†TV
4
Press the ù (or û ) button to select the CATV/TV
option, then press the > (or < ) button to select
“CATV” (if you subscribe to a cable TV service) or
“TV” (for normal broadcast reception through an
antenna).
5
Press the MENU button twice.
The main MENU appears.
6
Press the
ù
(or
û
) button to select the Auto tuning
memory option, then press the OK button.
The VCR programs all unscrambled channels that
are available in your area into the tuner memory.
The “Auto tuning memory” message is displayed
while the channels are automatically set.
Before starting
SC4W/NA (VHR-M340 GB) Tue. Jan. 18/2000
19