Sanyo VDC-D1185VP, Руководство по обслуживанию

Страница: 1 / 26

Scanning system : PAL standard (625 TV lines, 25 frames/sec.)
Interlace : PLL 2:1 interlace
Image device : 1/4 inch solid state image device CCD
Picture elements : 795 (Horizontal) x 596 (Vertical)
Effective picture elements : 752 (Horizontal) x 582 (Vertical)
Synchronizing system : Internal sync, Line lock
Resolution : 520 TV lines horizontally, 400 TV lines vertically
Video output level : 1.0 Vp-p/75
Ω
, composite
Video S/N ratio : More than 48 dB
Minimum required illumination : Approx. 0.06 lux with a F 1.4 lens (B/W mode),
(incandescent lighting) Approx. 1.2 lux with a F 1.4 lens (colour mode)
Power and Day/night cable : Manual colour/black and white setting
Backlight compensation : Manual ON (Multi-spot photometry,
Centre-focus photometry)/OFF switching
(Active when using an auto-iris lens)
Electronic shutter : 4 speeds, selectable by switches:
(1/50, 1/120, 1/1000, 1/2000 sec.)
White balance : ATW/Manual switching
Pan/tilt adjustment : Manual Pan:
±
180 degree, Tilt: 115 degree
Lens : f = 2.8 - 5.8 mm, F1.4 - F1.8
Environmental conditions : Temperature: -10
°
C ~ + 50
°
C
Humidity: less than 90 % (no condensation)
Power supply : 24 V AC, 50 Hz and 12 -15 V DC
Power consumption : Approx. 2.9 W
Weight : VDC-D1185VP: Approx. 1,350 g
VDC-D2185VP: Approx. 1,015 g
SERVICE MANUAL
COLOUR CCD Camera VDC-D2185VP
(Product Code : 117 124 01)
FILE NO.
REFERENCE No. SM5310501
L5AK4/XE, L5AL4/XE
NOTE : 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.
Design and specification are subject to change without notice.
The components designated by a symbol ( ! ) in this schematic diagram designates components whose value are of
special significance to product safety. Should any component designated by a symbol need to be replaced, use only the
part designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.
PRODUCT SAFETY NOTICE
CONTENTS
1. DISASSEMBLY ....................................2
2. BOARD LOCATION ............................. 3
3. ADJUSTMENT ..................................... 4
4. PARTS LIST ......................................... 7
CIRCUIT DIAGRAM &
PRINTED WIRING BOARDS ................. C1
SPECIFICATIONS
(Product Code : 117 125 01)
(Europe)
VDC-D1185VP
VDC-D2185VP