SERVICE MANUAL
B/W CCD Camera
VCB-3455P
(Product Code : 117 074 27)
(Product Code : 117 074 30)
(Europe, U.K., Russia)
(Asia, Mideast, China)
(Australia, New Zealand)
FILE NO.
REFERENCE No. SM5310604
L73S2/XE,XE2
NOTE : 1. Parts order must contain model number, part number, and description.
2. Substitute parts may be supplied as the service parts.
3. N. S. P. : Not available as service parts.
Design and specification are subject to change without notice.
The components designated by a symbol (
) in this schematic diagram designates components whose value are of
special significance to product safety. Should any component designated by a symbol need to be replaced, use only the
part designated in the Parts List. Do not deviate from the resistance, wattage, and voltage ratings shown.
PRODUCT SAFETY NOTICE
CONTENTS
1. DISASSEMBLY ....................................2
2. BOARD LOCATION ............................. 3
3. ADJUSTMENT ..................................... 4
4. PARTS LIST .........................................5
CIRCUIT DIAGRAMS & PRINTED
WIRING BOARDS ..................................C1
SPECIFICATIONS
Scanning system : CCIR standard (625 TV lines, 25 frames/sec.)
Interlace : PPL 2:1 interlace
Image device : 1/3 inch solid state image device CCD
Number of pixels in image area : 500 (Horizontal) x 582 (Vertical)
Synchronizing system : Internal sync/ Line lock (only when using an AC
power supply)
Resolution : 400 TV lines
Video output terminal : 1.0 Vp-p/75
Ω
, composite
Image S/N ratio : More than 50 dB
Minimum required illumination : Approx. 0.05 lx (F 1.2 lens)
Backlight compensation : ON/OFF
Lens iris output terminal : 4-pin
Lens mount : CS mount
Flange-back : 12.5 mm
±
0.5 mm
Lens setting : EI/VIDEO/DC
Operating environment : Temperature: -10
−
+ 50
°
C (14
°
F
−
122
°
F)
Humidity: less than 90 % RH (no condensation)
Power supply : AC 24 V
±
10% 50Hz, DC 12
−
15 V
Power consumption : Approx. 3.0W
Weight : Approx. 245 g
