Operation:
1.
Set the mode selector for fan, cooling or heating operation.
2.
Set the thermostat to the desired position. (Refer to the setting
temperature guide above.)
3.
1)
Set the operation selector switch.
NOTE
The above temperatures are provided for reference only, and may differ
from the actual temperature of the room.
How to stop the air
conditioner:
To stop the air conditioner, set the mode selector to OFF position.
How to restart the air
conditioner:
To restart the air conditioner, set the mode selector to desired position.
CAUTION
If the unit is turned off during cooling and heating, DO NOT restart it
immediately, as this can damage it. Wait at least three minutes before
starting
2) Freezing Up:
If you notice that your air conditioner is not cooling as it should, it may
be that ice has formed on the cooling coils. The ice blocks air flow and
stops the unit from cooling the room. This “freezing up” is a temporary
condition that most often occurs at night when the Thermostat is set on
the coldest setting and the Selector is set on LOW COOL.
To correct the condition set the Selector at (H or L) FAN or HIGH COOL
with the Thermostat with turning the thermostat knob to the opposite
direction from ”COOLER”.
it again.
WARMER
(88
°
F)
(55
°
F)
(55
°
F)
COOLER
COOLER
range
Intermediate
72
°
F
range
Intermediate
72
°
F
THERMOSTAT
(setting temperature guide)
6
OI-602-06EG
oi602000
Cooling Only Model
Cool/Heat Model
Control Panel and Operation
Functions (continued)
